Torque Specifications
WARNING: This page is about a different car, the 2000 Mazda B4000 and 1999 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Bellhousing-To-Engine Bolt |
30-40 (40-55) |
| Camshaft Sprocket Bolt |
44-50 (60-68) |
| Connecting Rod Nut |
| 7AD |
18-24 (25-32) |
| 7AC & 7AE |
| Step 1 |
15 (20) |
| Step 2 |
Additional 85-95 Degrees |
| Crankshaft Damper-To-Crankshaft Bolt |
| Step 1 |
30-37 (40-50) |
| Step 2 |
Additional 80-90 Degrees |
| Cylinder Head Bolt |
| Step 1 |
48 (65) |
| Step 2 |
59-62 (80-85) |
| Step 3 |
Additional 80-85 Degrees |
| Engine Mount-To-Crossmember Nut |
65-97 (88-132) |
| Engine Mount-To-Engine Bolt |
44-58 (61-78.6) |
| Exhaust Manifold Bolt |
20-25 (27-34) |
| Fan Clutch |
35-46 (47-63) |
| Flexplate-To-Torque Converter Bolt |
22-30 (30-41) |
| Flywheel-To-Crankshaft Bolt |
| Step 1 |
9-11 (12-15) |
| Step 2 |
50-55 (68-75) |
| Lower Intake Manifold Bolts/Nuts |
| Step 1 |
|
| Step 2 |
11 (15) |
| Step 3 |
16 (22) |
| Main Bearing Cap Bolt |
66-77 (90-104) |
| Oil Level Sensor |
13-20 (17-27) |
| Oil Pump Retaining Bolt |
13-15 (17-21) |
| Power Steering Bracket Bolt |
30-40 (41-54) |
| Rocker Arm Assembly Bolt |
| Step 1 |
22-25 (30-34) |
| Step 2 |
Tighten an additional 90 degrees |
| Starter Bolt |
17-20 (23-27) |
| Timing Chain Cover Bolt |
13-15 (17.6-20) |
| Transmission Crossmember Bolt |
65-87 (88-118) |
| Upper Intake Manifold Bolt |
15-18 (20-25) |
| Water Pump Pulley |
16-21 (22-28) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Screw |
23-30 (2.5-3.5) |
| Camshaft Position Synchronizer Hold-Down Bolt |
71-106 (8-12) |
| Camshaft Thrust Plate Bolt |
80-97 (9-13) |
| Oil Pan Bolt/Nut |
62-89 (7-10) |
| Oil Pan-To-Transmission Bolt |
62-89 (7-10) |
| Valve Cover Bolt |
71-89 (8-10) |
| Water Pump Bolt |
71-108 (8-12) |