FixVault
Home › Mazda › 2000 › MPV DX › Repair and Diagnosis › External Pages › Different car › Section 135 (Front Suspension System) › Steering Gear And Linkage Removal/Installation › Engine Mount Member Installation Note

Engine Mount Member Installation Note

WARNING: This page is about a different car, the 2004 Mazda MPV, 2003 Mazda MPV, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the direction indicator on engine mount member bushings facing toward the front side, and install the bushings onto the engine mount member.
    Fig 1: Installing Engine Mount Member Bushings
    G00375715Courtesy of MAZDA MOTORS CORP.
  2. To install the engine mount member, put the No.2 engine mount stud bolts through the engine mount member installation holes.
  3. Install the engine mount member bolts A and nuts A. Tightening torque A: 47-65 ft. lbs. (64-89 N.m).
    Fig 2: Installing Engine Mount Member Bolts
    G00375716Courtesy of MAZDA MOTORS CORP.
  4. Loosely tighten the No.2 engine mount nuts B and C.
  5. Remove the SSTs (engine support).
  6. Tighten the No.2 engine mount nuts B and C. Tightening torque B: 50-68 ft. lbs. (67-93 N.m); C: 63-85 ft. lbs. (85-116 N.m).
About FixVault