Removal & Installation
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Remove appropriate front seat. Remove front seat under tray. Remove screws, disconnect electrical connectors and remove seat weight sensor control module. See Figure .
- To install, reverse removal procedure. Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Perform seat weight sensor inspection and calibration. See SEAT WEIGHT SENSOR CONTROL MODULE INSPECTION & CALIBRATION .