FixVault
Home › Mazda › 2000 › MPV DX › Repair and Diagnosis › External Pages › Different car › Section 151 (Seats) › Power Seat Switch Inspection

Power Seat Switch Inspection

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the power seat switch connector.
  2. Remove the seat back trim. See FRONT SEAT DISASSEMBLY/ASSEMBLY  .
  3. Disconnect the recliner motor connector.
  4. Remove the seat cushion trim. See FRONT SEAT DISASSEMBLY/ASSEMBLY  .
  5. Disconnect the rear tilt motor connector.
  6. Inspect for continuity between the power seat switch, recliner motor connector, and rear tilt motor connector terminals using an ohmmeter.
    • If not as specified, replace the power seat switch.
    Fig 1: Inspecting Power Seat Switch Continuity
    G01196426Courtesy of MAZDA MOTORS CORP.
About FixVault