FixVault
Home
›
Mazda
›
2000
›
MPV DX
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 216 (Engine Control System)
›
Pcm Inspection
›
Inspection Using An Oscilloscope (Reference)
›
IAC control signal
IAC control signal
WARNING:
This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IAC Control Signal Inspection By Using Oscilloscope (Reference)
Courtesy of MAZDA MOTORS CORP.
PCM terminal: 83(+)-24(-)
Oscilloscope setting: 2V/DIV (Y), 0.1 ms/DIV (X), DC range
Vehicle condition: idle after warm up