FixVault
Home › Mazda › 2000 › MPV DX › Repair and Diagnosis › External Pages › Different car › Section 218 (Automatic Transaxle (Service)) › O/D Off Switch Removal/Installation

O/D Off Switch Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  3. Remove the column cover.
  4. Remove the combination switch.
  5. Disconnect the connector.
  6. Remove the selector lever component.
  7. Install the selector lever component.

    Tightening Torque 

    7.9-10.7 N.m {80-110 kgf.cm, 69.5-95.4 in.lbf} 

  8. Connect the connector.
  9. Install the combination switch.
  10. Install the column cover.
  11. Install the steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
  12. Connect the negative battery cable.
About FixVault