FixVault

Power Steering Oil Pump Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the order indicated in the figure.
    Fig 1: Removing/Installing Power Steering Oil Pump
    G00998367Courtesy of MAZDA MOTORS CORP.
  2. Remove the No. 3 engine joint bracket. (See ENGINE REMOVAL/INSTALLATION .)
  3. Install in the reverse order of removal.
  4. Adjust the No.3 joint bracket. (See ENGINE REMOVAL/INSTALLATION .)