Windshield Washer Hose Removal/Installation: Notes

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bonnet insulator.
Partially peel off the right side mud guard.
Remove in the order indicated in the figure below.

Fig 1: Windshield Washer Hose Removal Order Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing Windshield Washer Hose
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.