Front Shock Absorber Disposal
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Clamp a shock absorber flat surface or with the piston pointing downwards.
- Drill a 2-3 mm {0.08-0.12 in}
hole at a point 20-30 mm {0.8-1.2 in}
from the bottom of the tube, so that the gas can escape.WARNING:
- Whenever drilling into a shock absorber, wear protective eye wear. The gas in the shock absorber is pressurized, and could spray metal chips into the eyes and face when drilling.
- Turn the hole downwards.
- Drain the oil by moving the piston rod several times up and down and cutting the tube at the end.
- Dispose of waste oil according to the waste disposal law.NOTE:
- Shock absorber gas is nitrogen gas.
- Shock absorber oil is mineral oil.