Boot Assembly Note
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The wheel side and transaxle side boots are different.
- Fill the boot (wheel side) with the specified grease supplied in the boot kit.CAUTION:
- Do not touch grease with your hand. Apply it from the tube to prevent foreign matter entering the boot.
Grease amount
- 130-150 g {4.59-5.29 oz}
- With the splines of the shaft still wrapped, in tape from disassembly, install the boot.
- Remove the tape.