Continuity Inspection
WARNING: This page is about a different car, the 2005 Mazda RX-8 and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the CPP switch.
- Verify that the continuity between CPP switch terminals B and D is as indicated in the table.
- If there is no malfunction, perform the "CIRCUIT OPEN/SHORT INSPECTION ".
- If there is any malfunction, replace the CPP switch.
CLUTCH PEDAL POSITION SWITCH SPECIFICATIONMeasurement condition Continuity Push the rod. No continuity Except above Continuity detected