Stabilizer Control Link Inspection
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the stabilizer control link from the vehicle.
- Inspect the link for bending or damage. If there is any malfunction, replace the link.
- Rotate the ball joint 10 times , and rock the ball joint 10 times.
- Measure the ball-joint rotational torque using an Allen wrench and a torque wrench.
Stabilizer control link ball joint rotational torque
- 0.23-0.47 N.m {2.35-4.79 kgf.cm, 2.04-4.15 in.lbf}
- If not within the specification, replace the stabilizer control link ball joint.