Propeller Shaft Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Align the marks and install the propeller shaft.
CAUTION:
- When installing a new carbon-fiber propeller shaft, install the shaft with the protective cover still on and then remove after completion.
- Handle the propeller shaft with careful attention.
When installing a new propeller shaft, align the differential companion flange mark with the tag on the propeller shaft and assemble.

Fig 1: Aligning Differential Companion Flange Mark With Tag On Propeller Shaft
Courtesy of MAZDA MOTORS CORP.