Driver-Side Air Bag Module: Installation
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove air bag simulator from clockspring connector. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Connect negative battery cable. With air bag simulators installed at all remaining deployable devices, verify system. See VERIFY SYSTEM under DIAGNOSTICS.
- Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK .