FixVault
Home › Mazda › 2000 › MPV DX › Repair and Diagnosis › General Information › OBD-II Drive Cycles › Drive Cycles › 1999: B2500, B3000, B4000 › Monitor Repair Verification Drive Cycle › Comprehensive Component Monitor Repair Verification Drive Cycle

Comprehensive Component Monitor Repair Verification Drive Cycle

  1. PerformVehicle Preparation For Drive Cycles .
  2. Go through the entire OBD-II Drive Cycle until the Comprehensive Component Monitor shows the completion status by clearing the code P1000 on the NGS tester.
    • If not completed, turn the key to OFF and repeat step 2 at least one more time.
  3. Perform Continuous Memory, KOEO and KOER ON-DEMAND SELF-TESTS.
  4. Verify no DTCs are available.
About FixVault