Rear Package Trim Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the rear side seat. See REAR SEAT REMOVAL/INSTALLATION.
Remove the child-restraint seat anchor.
Remove the high-mount brake light.
Remove the fasteners.
Pull the rear package trim to disengage hooks A from the body.

Fig 1: Removing/Installing Rear Package Trim
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.