FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 176 (On-Board Diagnostic [Engine Control System AJ)) › After Repair Procedure

After Repair Procedure

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS or equivalent to the DLC-2. See Figure.
  2. Cycle the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data using the WDS or equivalent.
About FixVault