FixVault
Home
›
Mazda
›
2000
›
MPV ES
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 180 (Engine Control System (AJ))
›
Pcm Inspection
›
Inspection Using An Oscilloscope (Reference)
›
CMP Sensor Signal
›
Vehicle Condition
Vehicle Condition
WARNING:
This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Idle after warm up (no load)
Fig 1: Inspecting CMP Sensor Signal Using Oscilloscope (+)
Courtesy of MAZDA MOTORS CORP.
Idle after warm up (no load)
Fig 1: Inspecting CMP Sensor Signal Using Oscilloscope (-)
Courtesy of MAZDA MOTORS CORP.