FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 207 (HVAC System) › Refrigerant System › Refrigerant System General Procedures › Manifold Gauge Set Installation

Manifold Gauge Set Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully close the valves of the manifold gauge.
  2. Connect the charging hoses to the high/ and low/ pressure side joints of the manifold gauge.
  3. Connect the quick couplers to the ends of the charging hoses.
  4. Connect the quick couplers to the charging valves.
    Fig 1: Installing Manifold Gauge Set
    G00992082Courtesy of MAZDA MOTORS CORP.
About FixVault