FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 218 (Automatic Transaxle (Service)) › Automatic Transaxle Removal/Installation › No. 1 Engine Mount Installation Note

No. 1 Engine Mount Installation Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Align the transaxle bolt holes and the engine mount exactly. Any Misalignment can result in bolts and bolt holes becoming damaged or stripped during installation.
  1. Use the SSTs  (engine support) to make sure the transaxle bolt holes and No. 1 engine mount align.
  2. Tighten the bolts to the specified torque.
About FixVault