FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 219 (Automatic Transaxle [Shift Mechanism]) › Key Interlock Resistor Removal/Installation

Key Interlock Resistor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect the key interlock resistor connector.
    Fig 1: Locating Key Interlock Resistor & Connector
    G00993737Courtesy of MAZDA MOTORS CORP.
  3. Remove the key interlock resistor.
  4. Install the key interlock resistor.
  5. Connect the key interlock resistor connector.
  6. Connect the negative battery cable.
About FixVault