FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 367 (Engine Mechanical [Lubrication System]) › Engine Oil Level Inspection

Engine Oil Level Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the vehicle on level ground.
  2. Warm up the engine to normal operating temperature.
  3. Stop the engine and wait for 5 min.
  4. Remove the dipstick and verify that the oil level is between the MIN and MAX marks on the dipstick and inspect the engine oil condition.
    • If the oil level is below the MIN mark, add the recommended engine oil.
    • If necessary, replace with the recommended engine oil.
About FixVault