Boot Assembly Note
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The wheel side and transaxle side boots are different.
- Fill the boot (wheel side) with the specified grease.CAUTION:
- Do not touch grease with your hand. Apply it from the tube to prevent foreign matter from entering the boot.
Grease amount
L3: 90-110 g {3.18-3.88 oz}
AJ: 105-125 g {3.71-4.41 oz}
- With the splines of the shaft still wrapped in tape from disassembly, install the boot.
- Remove the tape.