Side Protector Removal
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Pry the side protector end 20-30 mm {0.8-1.1 in}
using a flathead screwdriver or a razor.WARNING:
- Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
NOTE:- The side protector is installed with double-sided adhesive tape. If the side protector is difficult to remove, soften the double-sided adhesive tape using a hot air blower.
- Pull the side protector outward, then remove it.