FixVault

High-Mount Brake Light Removal/Installation: Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Removing High-Mount Brake Light
    G03701371Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.