FixVault
Home › Mazda › 2000 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 510 (Seats) › Front Tilt Motor Inspection

Front Tilt Motor Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the front tilt motor connector.
  2. Connect battery positive voltage to front tilt motor terminal A or B, then verify that the front tilt motor operate as shown in the table.
    • If the front tilt motor does not operate as indicated in the table, replace the front tilt motor.
    Motor operation Connection
    B+ GND
    Up B A
    Down A B
    Fig 1: Connecting Battery Positive Voltage To Front Tilt Motor Terminal
    G03703114Courtesy of MAZDA MOTORS CORP.
About FixVault