FixVault

Air Intake Actuator Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Remove the duct (1). See A/C UNIT REMOVAL/INSTALLATION .
  4. Remove in the order indicated in the table.
    Fig 1: Removal Order Of Air Intake Actuator Table
    G01022050Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
    Fig 2: Removing/Installing Air Intake Actuator
    G01022051Courtesy of MAZDA MOTORS CORP.