FixVault

Rear Heat Duct Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn over the floor covering. (See FLOOR COVERING REMOVAL/INSTALLATION .)
  2. Remove the rear duct. (See REAR DUCT REMOVAL/INSTALLATION  .)
  3. Remove in the order indicated in the Fig 1 .
    Fig 1: Removing/Installing Rear Heat Ducts
    G01136397Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.