Front Suspension: Description

Independent front suspension with MacPherson-type struts is used on all models. Strut assembly mounts between steering knuckle and upper fender panel. Lower control arm pivots at crossmember and is connected by ball joint to steering knuckle. All models are equipped with a stabilizer bar which attaches to each lower control arm and frame. See Fig 1 or Fig 2 .

Fig 1: Identifying Front Suspension Components (Protege)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Front Suspension Components (626 Is Shown; Tribute Is Similar)

Courtesy of MAZDA MOTORS CORP.