FixVault
Home › Mazda › 2002 › 626 ES, Automatic › Repair and Diagnosis › Engine Mechanical › Cooling Fan › Cooling System › Radiator Removal/Installation

Radiator Removal/Installation

  1. Disconnect the negative battery cable.
  2. Drain the engine coolant. See ENGINE COOLANT REPLACEMENT  .
  3. Remove the fresh-air duct.
  4. Remove the oil pipe. (FS: ATX)
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Radiator Removal/Installation (2.0L)
    G01119938Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Radiator Removal/Installation (2.5L)
    G01119939Courtesy of MAZDA MOTORS CORP.
About FixVault