Rear Differential General Specifications
Rear Differential General Specifications
| Item |
Specification |
| Clearance, Tolerance and Adjustment mm (Inch) |
| Maximum Back Face Ring Gear Runout |
0.102 (0.004) |
| Differential Case Maximum Runout |
0.076 (0.003) |
| Differential Side Gear Thrust Washer Thickness |
0.762 - 0.813 (0.030 - 0.032) |
| Differential Pinion Gear Thrust Washer Thickness |
0.762 - 0.813 (0.030 - 0.032) |
| Maximum Axle Shaft End Play |
0.762 (0.030) |
| Backlash Between Ring Gear and Pinion Teeth |
0.203 - 0.381 [0.305 - 0.381 preferred] (0.008 - 0.015 [0.012 - 0.015 preferred]) |
| Ring Gear Maximum Backlash Variation Between Teeth |
0.102 (0.004) |
| Pinion Maximum Runout |
0.25 (0.010 T.I.R.) |
| Rear Axle Speed Sensor Air Gap |
0.127 - 1.143 (0.005 - 0.045) |
| Capacities |
| Rear Axle Liters (Pints) |
2.37 (5.0) (6-14 mm [1/4-9/16 In.] Below the Bottom of the Filler Hole) |
| Limited Slip® ml (Ounces) |
118.29 (4) |