FixVault
Home › Mazda › 2002 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 161 (Glass/Windows/Mirrors) › Front Power Window Regulator Removal/Installation

Front Power Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front door glass. (See FRONT DOOR GLASS AND GUIDE REMOVAL/INSTALLATION .)
  3. Disconnect the front power window regulator connector.
  4. Remove the nuts, then remove the front power window regulator.

    Tightening Torque 

    1. 6.87-9.80 N.m {70-100 kgf.cm, 60.8-86.7 in.lbf} 

  5. Install in the reverse order of removal.
About FixVault