Rear Power Window Regulator Removal/Installation
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the rear door glass. (See REAR DOOR GLASS AND GUIDE REMOVAL/INSTALLATION .)
- Disconnect the rear power window regulator.
- Remove the nuts, then remove the rear power window regulator.
Tightening Torque
- 6.87-9.80 N.m {70-100 kgf.cm, 60.8-86.7 in.lbf}