FixVault

Front Resistor Inspection

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the resistance between the terminals of the front resistor is as shown in the table.
    • If there is any malfunction, replace the front resistor.
    Terminal Resistance (ohm)
    A-B 0.27
    A-C 0.77
    A-D 3.17
    Fig 1: Inspecting Front Resistor Connector Terminals
    G03700733Courtesy of MAZDA MOTORS CORP.