Connector Identification

NOTE: Transaxle connector No. 1 is identified as C1 in wiring diagram. Transaxle connector No. 2 is identified as C2 in wiring diagram.

Fig 1: Identifying Coupler Connector (8-pin) Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Coupler Connector (10-pin) Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 3: TCM Harness Connector Terminal Identification

Courtesy of MAZDA MOTORS CORP.

Fig 4: Identifying Transaxle Range Switch Component Connector Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 5: Identifying Transaxle Connector No. 1 Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 6: Identifying Transaxle Connector No. 2 Terminals

Courtesy of MAZDA MOTORS CORP.