FixVault
Home › Mazda › 2002 › MX-5 Miata Base, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › Cruise Control Module Removal/Installation

Cruise Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the lower panel.
  3. Remove the key interlock unit. See KEY INTERLOCK UNIT REMOVAL/INSTALLATION  .
  4. Remove in the order indicated in the table.
    Fig 1: Cruise Control Module Removal Sequence Table
    G01174427Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
    Fig 2: Removing & Installing Cruise Control Module
    G01174428Courtesy of MAZDA MOTORS CORP.
About FixVault