FixVault
Home › Mazda › 2002 › MX-5 Miata Base, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting Systems › Flasher Control Module Removal/Installation › Notes

Flasher Control Module Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the lower panel.
  3. Remove in the order indicated in the table.
    Fig 1: Flasher Control Module Removal Sequence Table
    G01173887Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing & Installing Flasher Control Module
    G01173888Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault