FixVault
Home › Mazda › 2002 › Millenia S › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics - 2.3L › Self-Diagnostic System › After Repair Procedure

After Repair Procedure

  1. Connect WDS or equivalent scan tool to DLC-2 located at left side of steering column, under instrument panel.
  2. Cycle the ignition from off to on.
  3. Follow scan tool manufacturer's operating instructions to connect equipment. Record DTC if retrieved.
  4. Erase all diagnostic data by WDS or equivalent scan tool, Follow scan tool manufacturer's operating instructions.
About FixVault