FixVault
Home › Mazda › 2002 › Protege5 Automatic › Repair and Diagnosis › Body & Frame › Power Mirrors › Power Outside Mirror Removal/Installation

Power Outside Mirror Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front door trim. See FRONT DOOR TRIM REMOVAL/INSTALLATION .
  3. Partially peel off the door screen.
  4. Disconnect the connector.
    Fig 1: Removing/Installing Outside Power Mirror
    G01186179Courtesy of MAZDA MOTORS CORP.
  5. Remove the nuts, and then remove the power outside mirror.
  6. Install in the reverse order of removal.
About FixVault