FixVault
Home › Mazda › 2002 › Protege5 Standard › Repair and Diagnosis › Engine Mechanical › Engine Mechanical 2.0L › Cylinder Block Disassembly/Assembly › Assembly Notes › Main Bearing Cap Assembly Note

Main Bearing Cap Assembly Note

  1. Inspect main bearing cap bolts. See MAIN BEARING CAP BOLT INSPECTION .
  2. Tighten bolts to specification in the order shown. See Figure. See TORQUE SPECIFICATIONS .
  3. Put a paint mark on each bolt head.
  4. Using the mark as a reference, tighten bolts by turning each an additional 85-90 degrees in tightening sequence.
About FixVault