FixVault
Home › Mazda › 2002 › Protege5 Standard › Repair and Diagnosis › External Pages › Different car › Section 277 (Lubrication) › Oil Pump Removal/Installation › Notes

Oil Pump Removal/Installation: Notes

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt. (See TIMING BELT REMOVAL/INSTALLATION (ZM) for Canadian.) (See TIMING BELT REMOVAL/INSTALLATION [FS] for US.)
  2. Remove the timing belt pulley.
  3. Remove the oil pan. (See OIL PAN REMOVAL/INSTALLATION .)
  4. Remove the A/C compressor with the pipe still connected.
  5. Remove the A/C compressor bracket.
  6. Remove the generator. (ZM)
  7. Remove the transaxle (FS) (See REMOVAL & INSTALLATION .) (See AUTOMATIC TRANSAXLE (ATX) REMOVAL/INSTALLATION .)
  8. Remove in the order indicated in the figure.
    Fig 1: Identifying Components Of Oil Pump - FS
    G01913406Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Components Of Oil Pump - ZS
    G01913407Courtesy of MAZDA MOTORS CORP.
  9. Install in the reverse order of removal.
About FixVault