FixVault
Home
›
Mazda
›
2003
›
6 s, Automatic
›
Repair and Diagnosis
›
Body & Frame
›
Ignition Switch/Steering Lock
›
Power Systems
›
Fuse Block Removal/Installation
Fuse Block Removal/Installation
Disconnect the negative battery cable.
Remove the left-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
Remove in the order indicated in the figure below.
Fig 1: Fuse Block Removal Order Table
Courtesy of MAZDA MOTORS CORP.
Fig 2: Removing Fuse Block
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.