FixVault
Home › Mazda › 2003 › 6 s, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Controls [Self-Diagnostics 2.3L]) › System Tests › Variable Valve Timing Control System Operation Inspection › When Idling Cannot Be Continued

When Idling Cannot Be Continued

WARNING: This page is about a different variant/trim than selected.
  1. Remove Oil Control Valve (OCV) and verify spool valve is at maximum retard position.
  2. Connect OCV.
  3. Turn ignition on.
  4. Verify spool valve is at maximum retard position. If spool valve is stuck in advance direction, inspect for short circuit in harnesses or connectors between OCV and PCM.
  5. Inspect variable timing actuator.
About FixVault