FixVault
Home › Mazda › 2003 › 6 s, Automatic › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Steering Gear And Linkage Assembly › Seal Ring Assembly Note

Seal Ring Assembly Note

  1. Install a new seal ring to the valve part of the pinion shaft using the SST  .
  2. After installing the new seal ring, seat it properly using the SST  .
  3. Install the snap ring.
    Fig 1: Installing SST Over Seal Rings
    G01930664Courtesy of MAZDA MOTORS CORP.
About FixVault