FixVault
Home › Mazda › 2003 › B2300 Base, Automatic › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Body Panels › Fender Front Removal/Installation › Removal Note

Removal Note

  1. Remove the front bumper. See BUMPER BRACKET FRONT REMOVAL/INSTALLATION  .
  2. Remove the parking lamp assembly; see PARKING LAMP ASSEMBLY REMOVAL/INSTALLATION .
  3. If equipped, remove the wheel splash guard.
    CAUTION:
    • Remove the electrical connector locators from the splash shield prior to removal.
    CAUTION:
    • On the RH splash shield, disconnect the vacuum lines from the vacuum reservoir.
  4. Remove the splash shield. See SPLASH SHIELD REMOVAL/INSTALLATION .
  5. Remove the front fender cowl side sound absorber.
  6. Remove the lower front fender to rocker panel bolt.
    • If equipped, remove and retain the front fender spacer(s) for installation.
  7. Open the front door and remove the front fender bolt.
  8. Remove the radiator grille opening panel.
  9. Remove the front fender to radiator support brace bolt.
  10. Position the radiator grille opening panel reinforcement forward.
  11. Remove the cruise control servo bolt and position the cruise control servo aside.
  12. Remove the front fender bolts.
  13. Remove the front fender.
About FixVault