FixVault
Home › Mazda › 2003 › B2300 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 298 (Power Steering System) › Ignition Key Release Button Removal/Installation

Ignition Key Release Button Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda B4000, 2004 Mazda B3000, and 2004 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the ignition switch lock cylinder; see IGNITION LOCK CYLINDER REMOVAL/INSTALLATION  .
  3. If equipped, remove the tilt wheel handle.
    Fig 1: Removing Tilt Wheel Handle
    G01936372Courtesy of MAZDA MOTORS CORP.
  4. Remove the upper and lower steering column shrouds.
    1. Remove screws.
    2. Remove shrouds.
    Fig 2: Removing Upper & Lower Steering Column Shrouds
    G01936374Courtesy of MAZDA MOTORS CORP.
  5. Remove the key release lever bolt (1), lever (2) and spring (3).
    Fig 3: Removing Key Release Lever Bolt , Lever & Spring
    G01936375Courtesy of MAZDA MOTORS CORP.
  6. Install in reverse order of removal.
About FixVault