Installation Note
- Install the front fender.
- Install the bolts.
Tightening torque
- 10-14 N.m (8-10 ft.lbf)
- If equipped, on the right hand front fender, install the cruise control servo.
- Install the bolt.
Tightening torque
- 9-12 N.m (7-9 ft.lbf)
- Install the grille opening panel reinforcement bolts.
Tightening torque
- 6-8 N.m (54-70 in.lbf)
- Install the front fender to radiator support brace bolt.
Tightening torque
- 10-14 N.m (8-10 ft.lbf)
- Install the radiator grille opening panel.
- Open the front door and install the front fender bolt.
Tightening torque
- 10-14 N.m (8-10 ft.lbf)
- Install the lower front fender to rocker panel bolt.
- If required, install the fender spacer(s), maximum two each side.
Tightening torque
- 10-14 N.m (8-10 ft.lbf)
- Install the front fender cowl side sound absorber.NOTE:
- Install the electrical connector locators into the proper positions.
NOTE:- On the right hand splash shield, connect the vacuum lines to the vacuum reservoir.
- Install the splash shield. See SPLASH SHIELD REMOVAL/INSTALLATION .
- If equipped, install the wheel splash guard.
- Install the parking lamp assembly. See PARKING LAMP ASSEMBLY REMOVAL/INSTALLATION .
- Install the front bumper. See BUMPER BRACKET FRONT REMOVAL/INSTALLATION .