FixVault
Home › Mazda › 2003 › MPV ES › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Door Key Cylinder Switch Removal/Installation

Door Key Cylinder Switch Removal/Installation

  1. Close the door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the door screen. (See FRONT DOOR LOCK AND OPENER REMOVAL/INSTALLATION  .)
  4. Disconnect the door key cylinder switch connector.
  5. Disconnect the rods.
  6. Remove the nuts, and remove the outer handle.
  7. Remove the pin, and remove the door key cylinder switch from the outer handle.
  8. Install in the reverse order of removal.
    Fig 1: Removing Pin, And Door Key Cylinder Switch From Outer Handle
    G01887487Courtesy of MAZDA MOTORS CORP.
About FixVault