Miata A/T
VSS is located on side of transaxle/transmission. Disconnect VSS connector. Measure resistance between sensor terminals. See VSS SPECIFICATIONS (MIATA A/T & MPV WITHOUT ABS) table. If resistance reading is not as specified, replace sensor. If resistance reading is as specified, repair or replace wiring harness.
VSS SPECIFICATIONS (MIATA A/T & MPV WITHOUT ABS)
| Application | Temperature - °F (°C) | Resistance - Ohms |
|---|---|---|
| Miata A/T | 68 (20) | 387-473 |
| MPV Without ABS | 68 (20) | 513-627 |