FixVault
Home › Mazda › 2003 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 517 (Entertainment System) › Diagnostic Assist Function › Power antenna inspection

Power antenna inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. With audio on and at radio mode, first press the POWER button and hold it, then press the SAT button for approximately 1 second. 
  2. Inspect the power antenna according to the following table:
    POWER ANTENNA INSPECTION

    Inspection Display Action
    Start power antenna inspection mode. NORMAL
    Ant - On 
    POWER ANTENNA OPERATING SIGNAL IS OUTPUT    		 Speakers output sound. System is okay.
    Speakers do not output sound. Inspect power antenna and wiring harness between base unit and power antenna.
    MALFUNCTIONING
    AMP - OF 
    AUDIO AMPLIFIER OPERATING SIGNAL IS NOT OUTPUT    		 Replace base unit.
  3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.
About FixVault